Warmoth Birdseye Maple Telecaster Neck
100-Neck.JPG |
Heel…Warmoth stamped
101-Neck.JPG |
The neck in the shipping box as I received it.
102-Neck.JPG |
Close-up of the headstock front.
103-Neck.JPG |
Close-up of the nut and first frets.
104-Neck.JPG |
Another picture in the shipping box.
105-Neck.JPG |
The back of the headstock.
106-Neck.JPG |
Close-up of the headstock heel.
107-Neck.JPG |
Close-up of the back of the neck.
108-Neck.JPG |
The images that were posted on Warmoth's website.
109-Neck.JPG |
Warmoth's return policy was 30 days I thought it prudent to inspect the neck.
110-Neck.JPG |
Checking the neck for straightness.
111-Neck.JPG |
Checking down the neck to ensure it is straight.
112-Neck.JPG |
Another straightness check…
113-Neck.JPG |
Another straightness check…
114-Neck.JPG |
Another straightness check…
115-Neck.JPG |
Preparing to attach the neck to the body - setting it in the neck cavity.
116-Neck.JPG |
Attaching the four neck screws and the neck plate.
117-Neck.JPG |
Tightening the neck screws.
118-Neck.JPG |
I set my cordless screwdriver's clutch at approximately 40%.
119-Neck.JPG |
Another angle of the neck plate and screws.
120-Neck.JPG |
The neck attached.
121-Neck.JPG |
